AG SPRAY 5281784, Owner'S Manual

Page: 5 / 34

Page 5
-------------------------- General Chemical Safety -----------------------------

READ and FOLLOW all chemical label’s instructions and warnings

AVOID inhaling, ingesting or coming into contact with any chemicals

KNOW applicable licensing and regulatory requirements for the chemical you plan to use

KNOW emergency procedures before handling chemicals

WEAR protective clothing, eye protection and chemical resistant gloves when filling, using and cleaning the sprayer. Wear
additional protective gear, such as facemask or apron, as recommended on the chemical label

EXERCISE EXTRA CAUTION around children or pets. Pesticides are especially toxic to them. Keep sprayer and spray
materials away from them at all times

DO NOT MIX OR POUR chemicals in an enclosed, unvented area

DO NOT USE flammable or corrosive chemicals in the sprayer

FLUSH the sprayer with clean water after every use AND before switching chemicals

STORE pesticides in a correctly labeled container and in a secure location

MONITOR the health of operators frequently exposed to pesticides, as recommended by the chemical label or local/federal
regulations
------------------------------ Chemical Application Safety --------------------------

INSPECT and PREPARE sprayer before each use as directed

DO NOT TURN ON POWER to sprayer until ready to spray in order to avoid unintended spray release

MAKE SURE NOZZLES ARE ORIENTED IN THE PROPER DIRECTION before starting the sprayer. As incorrectly positioned
nozzle may spray chemicals on you or others

KEEP sprayer and spray materials away from children and pets. Pesticides can be especially toxic to children and animals
-------------------------------- Pump Safety Precautions ----------------------------

Never pump flammable or explosive fluids such as gasoline, fuel oil, kerosene, etc.

Never pump acids (i.e. acid fertilizer) with super rollers. For acid fertilizer, Hypro recommends the Silver Series castings with
Teflon rollers

Never run the pump dry! Never pump faster than, or above, the maximum recommended speed and pressure

Never pump liquids at temperatures higher than the recommended maximum temperature (140° F/60° C). Do not exceed this
temperature

Before servicing your pump, disconnect the power, release all pressure and drain all liquids
Important Operation & Safety Information