background image

Page 4 

 

 ------------------------------- Before Operation ----------------------------------  

 

 

 

Carefully study and understand the owner’s manual 

 

Read and follow chemical manufacturer’s labels, warnings and instructions! A material safety data sheet (MSDS) should be    
provided by the chemical manufacturer 

 

To avoid injury from chemical hazards, wear the proper protective clothing. Each chemical manufacturer’s clothing requirements 
are listed under the “Personal Protective Equipment (PPE)” section in the chemical instructions 

 

Never exceed your tractor’s load rating 

 

Do not wear loose-fitting clothing which may catch in moving parts 

 

Give the sprayer a visual inspection for any worn parts, loose bolts or other visible problems and make any needed repairs 

 

Make sure the area is clear of any people or obstructions before using the sprayer 

 

Before adding chemicals, have all operators practice operating the sprayer (clean water only) and it’s attachments until all      
operators are completely capable of safe operation 

 

 -------------------------------- BEFORE SEASONAL USE ---------------------------- 

 

 

 

 

CHECK and TEST sprayer with water before adding chemical. 

Temperature change can cause material fitting expansion/

contraction. Serious injury could result from chemical leaks

 

 

REPLACE

 any worn or frayed hoses. Hose failure can result in serious damage

 

 

INSPECT

 pressure gauge. Insure the needle rests at zero when all pressure is relieved in the spray system. Failure to have a 

properly functioning pressure gauge can result in miss applications of chemical

 

 

 ----------------------------------- DURING OPERATION -------------------------------  

 

 

 

Always be aware of bystanders, particularly children! Always look before moving the sprayer or engaging the PTO 

 

Never leave running equipment unattended! 

 

Keep hands and body parts clear of all moving parts, especially the tractor PTO 

 

Be aware of dangerous terrain such as holes, slopes, drop-offs, banks, rocks and hidden hazards. Operate the tractor and   
sprayer up and down slopes, not across 

 

When operating on inclines, it is especially important that your tractor is equipped with Roll Over Protection System (ROPS) 

 

No passengers are allowed on or in the tractor or sprayer at anytime 

 

Allow for sprayer boom length when making turns 

 

Remember that accidents can even happen to seasoned operators. Always take your time and follow all safety instructions 

Important Operation & Safety Information 

Summary of Contents for 5281784



































Reviews: