AG Neovo PM-3202 User Manual Download Page 27

Page: 27 / 39

ADJUSTING THE LCD DISPLAY

Item

Function

Range

OPERATION

MODE

Select the operation mode setting.

• MODE1:

In case there is no operation for more than 4 hours, the

display will automatically go into standby mode.

In case there is no signal for 5 minutes, the display will

automatically go into standby mode.

The LAN function is disabled. (During power standby)

• MODE2:

The power consumption can be higher than MODE1.

Networked standby mode can be changed at POWER SAVE

MODE setting.

Note:

The POWER SAVE MODE/OFF IF NO OPERATION/

STANDBY menu option is not available if the setting is set to

MODE1.

MODE1
MODE2

POWER SAVE

MODE

Enable or disable the power saving mode.
When OFF is selected, startup time from standby mode is reduced.

Note, however, that more power will be consumed in standby

mode.
When ON is selected, current consumption is reduced while the

monitor is in standby mode. Note, however, that the startup time

from standby mode becomes longer.
If set to ON, certain RS-232C commands and LAN control cannot

be used in standby mode.

Note:

This menu item is not available if the OPERATION MODE is

set to MODE1.

OFF

OFF IF NO

OPERATION

Set whether or not the display automatically enters standby mode

when there is no operation for 4 hours.

Note:

This menu item is not available if the OPERATION MODE is

set to MODE1.

OFF

STANDBY

Set whether or not the display automatically enters standby mode

when there is no signal detected.

Note:

This menu item is not available if the OPERATION MODE is

set to MODE1.

OFF

NO SIGNAL AUTO

INPUT SEL.

Enable or disable the device to detect and display from available

video input automatically.

Note:

This menu item is not available if the OPERATION MODE is

set to MODE1.

OFF

AUTO PLAY

Disable

the function or set the type of file to be automatically

played from a USB flash drive.

OFF

PHOTO

MOVIE

MONITOR

BUTTONS LOCK

Enable or disable the control panel buttons function of the LCD

display.

Note:

• To unlock the function by using the remote control, press

“OPTIONS”, “UP”, “DOWN”, “LEFT”, and “RIGHT” buttons.

UNLOCKED

LOCK ALL

Summary of Contents for PM-3202








































Search results

Summary of Contents for PM-3202

Reviews:

Related manuals for PM-3202

Brands by name

Popular brands

AG Neovo PM-3202, User Manual

Search results

Summary of Contents for PM-3202

Reviews:

Related manuals for PM-3202

Brands by name

Popular brands