13
PRODUCT DESCRIPTION
1.6.3 Inserting the Batteries in the Remote Control
The remote control is powered by two 1.5V AAA batteries.
To install or replace batteries:
1
Press and then slide the cover to open it.
2
Align the batteries according to the (+) and (-) indications
inside the battery compartment.
3
Replace the cover.
1.6.4 Handling the Remote Control
• Do not subject to strong shock.
• Do not allow water or other liquid to splash the remote control. If
the remote control gets wet, wipe it dry immediately.
• Avoid exposure to heat and steam.
• Other than to install the batteries, do not open the remote control.
1.6.5 Operating Range of the Remote Control
Point the top of the remote control toward the display’s remote control
sensor (on the left or right side) when pressing a button.
When using the remote control, the distance from the remote control
to the sensor on the display should be less than 8m/26ft, and the
horizontal and vertical angles should be less than 30˚.
< 8m
Caution:
The incorrect use of batteries can
result in leaks or bursting. Be sure
to follow these instructions:
♦
Place “AAA” batteries
matching the (+) and (–) signs
on each battery to the (+)
and (–) signs of the battery
compartment.
♦
Do not mix battery types.
♦
Do not combine new batteries
with used ones. It causes
shorter life or leakage of
batteries.
♦
Remove the dead batteries
immediately to prevent them
from liquid leaking in the
battery compartment. Don’t
touch exposed battery acid, as
it can damage your skin.
Note:
♦
If you do not intend to use
the remote control for a long
period, remove the batteries.
♦
The remote control may not
function properly when the
remote control sensor on this
display is under direct sunlight
or strong illumination, or when
there is an obstacle in the path
of signal transmission.
