63
ADJUSTING THE LCD DISPLAY
5.5 Network Settings
Picture
Sound
Tiling
General settings
Network settings
View network settings
Network configuration
Static IP configuration
Digital Media Render...
Network name
1
Press the
MENU
button on the control
panel or the button on the remote
control to call out the OSD window.
2
Select
Network settings
, then press
the
INPUT
button on the control
panel or the
button on the remote
control.
3
Press the / button on the control
panel or the / button on the remote
control to select an option.
Item
Function
Operation
Range
View network
settings
View connected network status.
Press the
INPUT
button on the
control panel or the
button on
the remote control.
Close
Network
configuration
Choose how the LCD display should
assign addresses to the network
resources.
Press the / button on the
control panel or the / button on the
remote control to select the setting.
DHCP & Auto
IP
Static IP
Static IP
configuration
Configure the network parameters,
such as IP address, netmask,
gateway, DNS 1, and DNS 2.
Note:
This function can be only
configured when the
Network
configuration
setting is set to
Static
IP
.
• Press the / button on the
control panel or the / button
on the remote control to select
the item. Then press the
INPUT
button on the control panel or
the
button on the remote
control to confirm the selection.
• Use the digit numbers [0]
~ [9] on the remote control
to configure the network
parameters.
• When the setting is complete,
press the
INPUT
button on the
control panel or the
button.
Press the / button on the
control panel or the / button
on the remote control to select
Done
. Then press the
INPUT
button on the control panel or
the
button on the remote
control to save the setting.
IP address
Netmask
Gateway
DNS 1
DNS 2
