S
ETUP
AND
O
PERATING
P
ROCEDURES
17
Ag-Bag International, Ltd.
MB7010 HyPac November 2003
Section 4
F
EED
T
ABLE
P
REPARATION
1
3
4
Check for clearance in front of
the feed table. A minimum of 20-
ft clearance should be main-
tained.
1. Unhook the feed table locking
pins.
2 Lower the feed table to the
ground. (See page 8 item #11)
a. Press bottom of switch to
lower the feed table.
b. Immediately release the
switch to stop feed table.
3. Loosen the load binder to un-
lock the feed table wings. Open
the wings by lifting outwards.
4. Secure the feed table wings
with the locking hook.
Crush Hazard Exists
Make sure area under feed
table is clear before lowering
the Feed Table.
