15
S
ERVICE
AND
M
AINTENANCE
STOP
MACHINE
AND
TURN
OFF
ENGINE
TO
ADJUST
,
LUBRICATE
,
OR
SERVICE
.
Ag-Bag International, Ltd.
MB7010 HyPac November 2003
Section 7
Beater Bar Chain Tension
Air Brakes Adjusting
Beater Bar Chain Tension
1. Beater Bar Chain
2. Chain Tensioner
3. Chain Tensioner Spring
There is no adjustment needed
for this chain, the tensioning
spring maintains a constant
pressure on the chain. Lubricate
the chain according to the sched-
ule in this manual.
Air Brake Adjusting
1. Release the brake pressure.
2. Slide the slack adjuster sleeve
(2) up. Use a 9/16” wrench on the
slack adjusting nut (3).
3. Tighten the slack adjusting nut
(3) until snug by turning the
wrench counter-clockwise look-
ing from the top.
4. When the nut is snug, loosen
if 1/4 turn clockwise.
5. Make sure the nut locking
sleeve (2) slides down over the
nut.
6. Slack adjuster (1) will now
move so the rod (4) moves up
and down about 1/4”.
Rolling Hazard
Block all wheels prior to re-
leasing brake pressure.
1
2
3
1
2
4
3
1. Slack Adjuster
2. Slack Adjuster Nut Slip Sleeve
3. Slack Adjuster Nut
4. Brake Rod.
