S
AFETY
9
STOP
MACHINE
AND
TURN
OFF
ENGINE
TO
ADJUST
,
LUBRICATE
,
OR
SERVICE
.
Ag-Bag International, Ltd.
MB7010 HyPac November 2003
Section 1
•
The use of a flashing amber light is acceptable in most localities. However, some
localities prohibit their use. Local laws should be checked for all highway lighting and marking
requirements.
•
When driving the tractor and equipment on the road or highway at night or during the
day, use flashing amber warning lights and a slow moving vehicle (SMV) identification em-
blem.
•
Plan your route to avoid heavy traffic.
•
Be a safe and courteous driver. Always yield to oncoming traffic in all situations, in-
cluding narrow bridges, intersections, etc.
•
Be observant of bridge loading ratings. Do not cross bridges rated lower than the
gross weight at which you are operating.
•
Watch for obstructions overhead and to the side while transporting.
•
Always operate equipment in a position to provide maximum visibility at all times.
PERFORMING MAINTENANCE:
•
Good maintenance is your responsibility. Poor maintenance is an invitation to trouble.
•
Make sure there is plenty of ventilation. Never operate the engine of the towing vehicle
in a closed building. The exhaust fumes may cause asphyxiation.
•
Before working on this machine, stop the towing vehicle, set the brakes, disengage
the PTO and all power drivers, shut off the engine and
remove the ignition keys.
•
Be certain all moving parts on the machine have come to a complete stop before
attempting to perform maintenance.
•
Always
use a safety support and block the wheels. Never use a jack to support the
machine.
•
Always use the proper tools or equipment for the job at hand.
•
Use extreme caution when making adjustments.
•
Follow the torque chart in this manual when tightening bolts and nuts.
