AFX SPOT100-LED, User Manual

Page: 7 / 40

EN 7
www.afx-light.com
Error Description
MT board connection failed The driver board did not respond. Serial communication line
connecting display panel and driver board
There is a problem, or there is a problem with the driver
board.
Pan Reset failed X-axis photoelectric switch, or problem with X-axis motor
Tilt Reset failed Y-axis photoelectric switch, or problem with Y-axis motor
Pan Hall failed Pan Hall have problem
Tilt Hall failed Tilt Hall have problem
Color Wheel Reset failed Color Wheel Hall, or Color Wheel motor have problem
Gobo Wheel Reset failed Gobo Wheel Hall, or Gobo Wheel motor have problem
Focus Reset failed Focus Hall, or Focus motor have problem
ADVANCED
Password is “ ▲▲▲

”, then press the OK to enter into the Advanced Interface.
Option Description
Sensor Monitor
Hall 1-6 State
Hall XY State
Pan Tilt Codewheel State
Pan Codewheel Step
Tilt Codewheel Step
Reset Calibration
Pan Calibration
After entering the sub-interface, you
can adjust the motor such as X-axis and
Y-axis.
Reset position to compensate for errors in
hardware installation,
Adjustment range -128~+127, +0 means
no adjustment.
Tilt Calibration
Color Calibration
Gobo Calibration
Focus Calibration
Prism Calibration
Rt Gobo Calibration
Zero Point Correction ON
DMX CHANNEL TABLE
CH 14 Channel Mode
1 Pan
2 Pan Fine
3 Tilt
4 Tilt Fine
5 Pan/Tilt Speed
6 Dimmer
7 Shutter/Strobe
8 Color
9 Fixed Gobo Wheel
10 Rotation Gobo Wheel
11 Gobo rotate
12 Prism