©Copyright LOTRONIC 2017
DYNAMIC-LZR
Page 4
CONTROL PANEL
To access the main menu press the MENU button. Press the UP or DOWN buttons
until you reach function you wish to change. When you reach the function you
wish to change, press the ENTER button. When a function is selected, use the UP
or DOWN buttons to change the function settings. Once your changes are made,
press the ENTER button, and then press and hold the MENU button for at least
three seconds to confirm and lock the change into the system memory. If the
MENU
button is not pressed and held
within eight seconds the fixture will automatically confirm and lock the change into the system memory. To exit
without making any adjustments, press the MENU BUTTON.
FUNCTION MENU
ADDR
A001 - A512, DMX Address setting
CHND
14 ch
18 ch, select the channel mode
SLND
Mast
SLAV ( MASTER, SLAVE OPTION)
SHND
SOUN, AUTO1-AUTO9
AUTO
OFF (sound controlled mode)
ON (Auto Mode)
SENS
000 – 100 Sound sensitivity control (0 close, 100 The most sensitive)
BLND
Yes - No (STANDBY MODE)
LED
On - Off (Background LIGHT ON/OFF)
DISP
YES/NO (Reverse Display)
TEST
Test
VER
V104 Software version
RSET
Reset
Settings
DMX Address Setting
1. Press the MENU, UP or DOWN button until “
ADDR
” is displayed, press ENTER.
2. The current address will now be displayed and flashing. Press the UP or DOWN buttons to find your desired
address.
3. Press ENTER to confirm.
DMX channel mode
1. Press the MENU button until “
CHND
” is displayed, press ENTER. Either “
14CH
”, “
18CH
” will be displayed
2. Press the UP or DOWN buttons to find your desired DMX channel mode and press ENTER to confirm and exit.
SLnd
This option is for setting the unit’s Master-slave mode. Press
MENU
to select
SLnd
Then press
Enter
to start setting.
You will find
MAST
or
SLAV.
Press UP or DOWN to choose Master or slave, then press
Enter
again to confirm your
selection.
MAST: Choose the device as master
SLAV: Choose the device as slave
SHND - Auto or Sound controlled
