©Copyright LOTRONIC 2017
PROPAR6 / 18-WH
2
1.
Safety Instructions
Please read the instructions carefully. They contain important information about the installation, operation and
maintenance.
•
Please keep this User Manual for future reference. If you sell the unit to another user, be sure that he also receives
this instruction booklet.
•
Unpack and check the unit carefully that it has not been damaged during transport before using the unit.
•
Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit.
•
The unit should be connected to a main socket outlet with a protective earth connection
•
The unit is for indoor use only in a dry location.
•
The unit must be installed in a location with adequate ventilation, at least 0.5m from adjacent surfaces. Be sure that
no ventilation slots are blocked.
•
Disconnect mains power before fuse replacement or servicing.
•
Replace fuse only with the same type.
•
Make sure there are no inflammable materials close to the unit during operation.
•
Use safety cable when fixing this unit.
•
In the event of serious operating problem, stop using the unit immediately.
•
Never try to repair the unit by yourself. Repair carried out by unskilled people can lead to damage or malfunction.
Please contact the nearest authorized technical assistance center and always use the same type of spare parts.
•
Do not touch any wires during operation as high voltage might be causing electric shock.
•
The product is for decorative purposes only and not suitable as a household room illumination.
DISCONNECT DEVICE
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain
readily operable.
2. Specifications
PROPAR6-W
PROPAR18-WH
Power supply
AC110~240V 50/60Hz
Consumption
35W
105W
Fuse
T1A, 250V
T2A, 250V
DMX control channels
6 / 8 / 12 + HSV
DMX512 Connection
3-pin XLR
3- & 5-pin XLR
LED type
6 W Warm white/Cool White 2in1
Number of LEDs
6
18
Beam angle
25°
Max. housing temp.
60°C
65°C
Min. distance from flammable surfaces
0.5m
Min. distance to lighted objects
0.1m
Dimensions
235 x 215 x 110mm 310 x 310 x 110mm
Weight
2.8kg
5.5kg
3. Installation
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid
vibration and slipping while operating. Always ensure that the structure to which you are attaching the unit is secure and
able to support a weight of 10 times of the unit’s weight. Also always use a safety cable that can hold 12 times the weight
GB