Menu “Macro Start”
48
MAXILYZER NG Plus
9
Menu “Macro Start”
The handling of the device can be facilitated enormously by means
of customised measuring programme configurations that can be sa-
ved as programme-macros (refer to chapter Function “Programme
macros“, page 41). Up to three different and customised macros can
be used.
Requirement for the use of macros are customised sets of meas-
urement programme settings that can be started in an efficient way
refer to chapter Function “Programme macros“, page 41.
Open the “Macro Start” menu.
Key
Function
Start required macro.
After having started the macro the settings it is based on
will be activated automatically after the calibration phase
and without showing the list of fuels.
If a „Confi.-reset“, refer to chapter 11.4, page 61, is carried out all
macro-settings will be lost. Without customised settings the settings
for the fuel gas analysis will be used.
