Installation and commissioning
14
GRM
The control unit must not be reached by water or splash water.
The control unit must not be installed in damp rooms.
The maximum ambient temperature at the control unit must not
be exceeded, refer to table 2, page 10.
In the case of outdoor installation, the control unit must be pro-
tected from direct atmospheric influences.
1. Open
control
unit.
2.
Fasten control unit to the wall (A or B).
A 1 Mount the screw to the wall.
2
Hang the control unit to the screw.
3
Fixate the control unit by screwing the lug
to the wall.
B Drill the fastening holes in the
bottom part with a Ø 5 mm drill.
Mount the bottom part to the wall
with the screws shipped with the
unit.
