Afriso EURO-INDEX OWWG 3, Operating Instructions Manual

Page: 45 / 135

Safety – German –
6 ÖWWG 3
2.2 Predictable incorrect application
The oil/water alarm unit ÖWWG 3 must never be used in the follow-
ing cases and for the following purposes:
•
Liquids which tend to become highly viscous or lead to aggluti-
nations or deposits
•
Liquids with a flash point of < 55 °C
• Hazardous area (Ex)
If the product is operated in hazardous areas, sparks may cause
deflagrations, fires or explosions.
• Contact with liquids over an extended period of time
•
Unprotected drip pans installed outdoor
•
In conjunction with products which are used for health-saving or
life-saving purposes or whose operation may incur hazards to
humans, animals or property
2.3 Safe handling
This product represents state-of-the-art technology and is made ac-
cording to the pertinent safety regulations. Each product is subjected
to a function and safety test prior to shipping.

Operate the product only when it is in perfect condition. Always
observe the operating instructions, all pertinent local and na-
tional directives and guidelines as well as the applicable safety
regulations and directives concerning the prevention of acci-
dents.
DANGER Severe burns or death caused by mains voltage (AC 230 V,
50 Hz) in the control unit.

Do not expose the control unit to water.

Disconnect the mains voltage supply before opening the control
unit or before performing maintenance and cleaning work and
make sure it cannot be switched on by accident.

Do not tamper with the control unit in any way whatsoever.
WARNING Severe burns, explosions, deflagrations or fires caused by tem-
peratures of up to 100 °C at the probe tip.

Never touch the probe tip.