Afore AF3.6K-DH, Installation And Operation Manual

Page: 37 / 52

３６
,
MENU
Protection Param
Protection Param
▲ / ▼ Chose
* * * *
V.max: xx V V.min: xx V
F.max: xx Hz
F.min: xx Hz
F.maxT: xx S
V.minT: xx S
V.maxT: xx S
EarthChk: ON
5.3.13 Communication Parameters
Step1: “ ” Entry Menu,
Step2: “
▲
/
▼
” Up/Down Chose Communication Param , “ ” Confrim,
Step3: “
▲
/
▼
” Up/Down, if chose
Wifi
, “ ” Confirm,
Step4: “
▲
/
▼
” Up/Down Chose Wifi Addr (defualt value “1” ), “ ” Confirm,
Step5: “
▲
/
▼
” Up/Down Chose Wifi Prot (Wifi protocol: “Modbus / SunSpec” ), “ ” Confirm,
Step6: “
▲
/
▼
” Up/Down, if chose parallel (Multi-inverter parallel working), “ ” Confirm,
Step7: Under P Addr , “
▲
/
▼
” Up/Down chose inverter number of parallel working , “ ”
Confirm,
Step8: “
▲
/
▼
” Up/Down chose P Baud , “ ” Confirm,
Step9: “ ” Return.
MENU
Com Param
Com Param
Wifi Prot
：
Modbus
Wifi Prot
：
Modbus
SunSpec
Com Param
PV Mode
▲ / ▼ Chose
▲ / ▼ Chose
6. Power ON/OFF
Please check the following requirements before testing:

Installation location is suitable according to Chapter 4.1.3.

All electrical wires are connected tightly, including PV modules, battery and AC side(Such
as the grid side, EPS side, Gen side).

Earth line and Smart meter/CT line are connected.

AF-DF hybrid inverters should be set according to the required local grid standard.

More information please contact with Afore or distributors.