21
20
ELLIPTICAL OPERATION
This section explains how to use your elliptical’s console and programming.
The BASIC OPERATION section in the ELLIPTICAL GUIDE has instructions for the following:
•
LOCATION OF THE ELLIPTICAL
•
POWER/GROUNDING INSTRUCTIONS
•
FOOT POSITIONING
•
MOVING THE ELLIPTICAL
•
LEVELING THE ELLIPTICAL
•
POWER/MANUAL INCLINE OPERATION
•
USING THE HEART RATE FUNCTION
7.3AE
19
22
21
11
20
18
ASSEMBLY
STEP 10
(
7.3AE
)
If you would like to use the elliptical without the
UPPER HANDLEBARS (19)
, you can install the
HANDLEBAR COVERS (21)
instead.
NOTE: All hardware for this step is included in the
plastic bag with the HANDLEBAR COVERS.
A If the
UPPER HANDLEBARS (19)
are
already installed, remove the
PRE-
INSTALLED SCREWS (20)
and slide
off the
UPPER HANDLEBARS (19)
and
HANDLEBAR BOOTS (18)
from the
LOWER
HANDLEBARS (11)
.
B Remove 2
HANDLEBAR COVERS (21)
and
SCREWS (22)
from plastic bag.
C Place
HANDLEBAR COVERS (21)
over the
LOWER HANDLEBARS (11)
and attach using
2 included
SCREWS (22)
.
AFG14_3.3AE_5.3AE_7.3AE_OM_r1_4.indd 20-21
5/20/14 9:12 AM
