STABILIZERS
21
Stabilizers are to be used, when specified, to guarantee the
structural stability of the tower.
Fig. 01
Fig. 01
Fig. 02
Fig. 02
Fig. 03
Fig. 03
Fig. 04
Fig. 04
Lightly tighten the upper clamp of the stabilizer on each corner vertical posts at a height where the
foot is touching the ground. Position the clamp of the lower arm such that the lower arm is as horizontal
as possible.
Fig. 01
Fig. 01
Position the stabilizers so that the footpads are approximately equidistant from each other.
Adjust the stabilizers and reposition the clamps as required to make firm contact with the ground.
When in correct position, tighten all the clamps firmly.
Fig. 02
Fig. 02
Fig. 03
Fig. 03
To position a tower in the corner of walls, remove the corner stabilizer and place the two towards
the wall, parallel to the wall. The middle one should be placed as shown in the graphic Fig.04
Fig. 04
Fig. 04
To position a tower against a wall, do not remove the stabilizer, move parallel to the wall.