1
2
3
Turn the cold water valve’s handle back to its
original position to turn the cold water supply on.
Check for leaks. If you see any leaking, shut off the
cold water supply then reconnect the system to the
water line and ensure all connections are snug.
If leaking continues, wrap the connections in
plumber’s tape for a stronger seal.
STEP 5
TURN ON COLD WATER SUPPLY
15
1
2
Position the bracket so there’s at least 3 inches of
clearance below the bottom of the filter cartridges
and the ground or wall.
Mark the bracket’s two eyelets with a pencil.
STEP 6
MOUNT SYSTEM (OPTIONAL)
Mounting is optional since the system’s performance is not
dependent on placement or orientation. If you don’t mount
your system, it can sit on the ground or lean on the wall.
Pen Mark
16
3
To lighten the load, remove the filter cartridges from
the bracket by twisting counterclockwise.
