![background image](http://html.mh-extra.com/html/afe-power/dfs780/dfs780_instruction-manual_2864082039.webp)
Page 39
aFepower.com
Step 42: Turn the key to the “Run” position and watch to see if the sight glass fills with fuel. If
the sight glass does not fill with fuel, use the tank valve (on the top of the sight glass
cover) to release any trapped air. If the sight glass still does not fill, try starting the
engine.
Step 43: Installation is now complete. Make sure that all fittings are tight and that fuel is not
leaking from any of the connections made while installing.
NOTE: Place enclosed CARB EO sticker on or near the device on a smooth/clean surface. EO identification label is
required to pass the smog test inspection.
Figure 36
INSTALL