Refer to Figure E for Steps 7-9.
Step 7: Thread the removal tool onto the fuel relief valve.
Step 8: Place the tip of the fuel relive valve on the edge of a vise and tighten.
Step 9: Turn the removal tool clockwise towards the vise to split the fuel relief valve.
Note: Be cautious and hold the end of the fuel relive valve it is spring loaded and not mixing the
components alignment is very important. Locate behind the 3 hole washer is a very small
pin that should not be moved or lost, losing it will cause the vehicle to not start.
Figure E
INSTALL
Summary of Contents for 77-46101 SCORCHER HD
Page 3: ...A D C B E ...