Afar AR24027, Operator'S Manual

Page: 48 / 100

AR24027 Operator’s Manual
4-7
location=”ASCII string”
Optional parameter to define the location of the node. This field is displayed in the “Display-
configuration” output and also reported through SNMP. This field is used for information only.
The location string can be up to 25 characters with no spaces. If spaces are desired, you may
include the whole string in quotation marks.
contact=”ASCII string”
Optional parameter to define the contact for maintenance purposes. This field is displayed in
the “Display-configuration” output and also reported through SNMP. This field is used for
information only. The contact string can be up to 25 characters with no spaces. If spaces are
desired, you may include the whole string in quotation marks.
Examples:
>node name=bank location=”wall street” contact=964-5848
rf-receive-setup
channel=3..37
antenna=a, b
This command configures the channel, and antenna used in the RF reception.
Note that for a remote radio to join the network, the channel selected by this command must
match the transmit channel selected for the hub radio.
Example:
> rfre ch=15
rf-transmit-setup
channel=3..37
antenna=a, b
power-dbm=0..23
speed-mbps= 0.25
or 0.50 or 1.37 or 2.75
This command configures the channel, antenna, transmit power and speed used in the RF
transmissions.
You only need to configure the transmit channel of the hub radio. The remote radios will
automatically set their transmit channels to match the receive channel of the hub.
Example:
> rftr ch=15 sp=2.7 po=18