Afag PEZ-100, Maintenance Instructions Manual

Page: 3 / 60

PEZ-52-65-80-100 BA-vers.1.3 gb.15.10.14.doc Seite 3
Table of contents:
1.0.0 Declaration of Incorporation Page 5
1.1.0 Declaration of Incorporation according to the Machinery Directive
2006/42/EG Page 5
2.0.0 Module Information Page 6
2.1.0 Transport and storage (packing and unpacking) Page 6
2.1.1 Overview for gantry axis PEZ Page 7
2.1.2 Overview for Motor- and gear Page 8
2.1.3 Connection for gantry axis Page 9
2.1.4 Assembly possibility in annex slide Page 10
2.1.5 Centering bushings and assembly raster Page 10
2.1.6 Tightening torques for screw Page 11
2.1.7 Safety Instructions Page 11
2.1.8 Redesign for the gear annex side Page 12
2.1.9 Go forward with gear redesign and motor Page 13
2.2.0 Mounting third-party-gears Page 15
2.2.1 Preferred combinations PEZ-52 Page 16
2.2.2 Preferred combinations PEZ-65 Page 17
2.2.3 Preferred combinations PEZ-80 Page 18
2.2.4 Preferred combinations PEZ-100 Page 19
2.2.5 Installation gantry axis in system Page 20
2.2.6 Tip for annex module Page 20
2.2.7 Motor connection Page 21
2.2.8 Programming of the gantry axis Page 22
2.2.9 False service of the arrangement Page 23
2.3.0 Noise Emissions Page 24
2.3.1 SE-Power Control and technical data Page 25
3.0.0 Montage Instructions Page 26
3.1.0 These montage Instructions are valid for PEZ Page 26
3.1.1 General description Page 27
3.1.2 Safety information Page 27
3.1.3 Included in the delivery Page 28
3.1.4 Warranty Page 29