R05.1
12/02/2020
Page 13
4
Operating instructions
4.1
Correlations between the transport speed and the LF spring package
(See Figure 6)
Basically the LF and the transport rail are adjusted in the standard configuration. This
means that all oscillating elements are set optimally.
The following factors however influence the combination LF / transport rail:
-
The parts to be conveyed (size, weight, shape, material and quality)
-
The feed rate
-
The support
-
Surrounding (are there other oscillating components with disturbing influence or
shakes from handling components)
Procedure for adjustment of the oscillating system:
WARNING
Unplug the power cable, before proceeding with further actions!
1.
Check the settings on the control device (see separate operating manual).
2.
Check that all springs and fixing screws are tight
3.
Check that the type and frequency of the magnets is correct
(see chapter 2.3)
4.
Check the air gap between magnetic coil and the anchor bolt
(see chapter 5.4)
5.
Switch on the LF and alter the transport speed with the controller regulator.
6.
Depending on the transport material, additional springs have to be installed or
removed
(see Chapter 5.2).
