Afag 50076883, Manual

Page: 3 / 44

3 PS 25-32-OI-vers.3.5 gb. 21.07.14.docx
Table of Contents:
1.0.0 Declaration of Incorporation
Page 5
1.1.0 Declaration of Incorporation according to the Machinery
Directive 2006/42/EG Page 5
2.0.0 Module Information
Page 6
2.1.0 Transport and storage (packing and unpacking) Page 6
2.1.1 Possibilities of fastening the Ps 25/32 Page 7
2.1.2 Hole matrix and centering bushings Page 8
2.1.3 Tightening torques for bolts Page 9
2.1.4 Slide unit load factors PS 25 Page 10
2.1.5 Preferred combinaisons PS 25 Page 11
2.1.6 Slide unit load factors PS 32 Page 12
2.1.7 Preferred combinations PS 32 Page 13
3.0.0 Montage Instructions
Page 14
3.1.0 Manufacturer address Page 14
3.1.1 Symbols Page 15
3.1.2 General description Page 15
3.1.3 Description of the module Page 16
3.1.4 Scope of supply Page 17
3.1.5 Designated use Page 17
3.1.6 Warranty Page 18
3.1.7 Areas of application Page 18
3.1.8 Dimensions drawing PS 25 Page 19
3.1.9 Technical data of the PS 25 Page 20
3.2.0 Dimensions drawing PS 32 Page 21
3.2.1 Technical data PS 32 Page 22
3.2.3 Pneumatic connection Page 24
3.2.4 Preparation for start-up Page 25
3.2.5 Setting the shock absorbers and the stop screw Page 26
3.2.6 Inquiry of the sensors Page 27
3.2.7 Accessories of the sensor Page 27
3.2.8 Optional intermediate stop ZA-PS 25/32 Page 28