8
10
19
Attach Bottom Mounting Bracket (10)
to the back of Diverter Valve (19).
4
Wrap one layer of Plumber's Tape
T-1 (included) onto the threaded lower
side of the shower arm. Connect the
Pivot Ball (4) to the shower arm.
Tighten with Adjustable Wrench (T-13).
T-13
3
/
32
"
10
7
T-3
Insert the Mounting Face Plate (7) into
the Bottom Mounting Bracket (10) and
tighten set screw using the 3/32" Allen
Wrench T-3(Included).
Remove
backing
from
Double Sided
Tape T-4 (Included) and attach to the
at side of Mounting Face Plate (7).
CAUTION:
Do not touch the
adhesive side of tape.
double sided tape
7
T-4
T-1
Slide the shower arm through the ange.
Wrap plumber's tape (T-1) clockwise
3 or 4 turns around threaded end of
shower arm. Connect the shower arm
to the wall water supply elbow
(not included)
by turning in a
clockwise direction.
.
Clean the wall area around the
Mounting Face Plate (10) with
Denatured Alcohol T-5 (Not included)
and allow to fully dry.
9
12
11
10
8
7
T-1
