Filter
gasket
1
2
3
4
5
With an adjustable wrench and rag,
remove the showerhead from the
shower arm by unscrewing the ball
joint in a counter-clockwise direction.
The lter gasket is located at the
opening of the showerhead ball
joint.
Remove the lter gasket from the ball
joint. If necessary, use needle-nose
pliers (not provided) and set aside.
Flush the lter gasket with water.
Reinstall the lter gasket into the ball
joint threads.
CLEANING AND CARE OF FILTER GASKET
17
Clean the left over Plumber’s Tape
from shower spout threads and apply
a new single layer of plumber’s tape.
Reattach the showerhead by screwing
the ball joint clockwise into the shower
spout threads. Tighten with an
adjustable wrench and rag.
6
