User Manual Albert / MTPT10
USER
MANUAL
P
A G E
|
48
11.1.2
Preventing and Remove a Paper Jam
Preventing Paper Jams
Do not touch the paper while it is being printed.
Do not hold your hand over the paper outlet before or during printing.
Pushing or pulling paper can cause paper jams, tear-off errors and paper feed
malfunctions.
Always tear off the paper in an upward direction to the right or to the left.
Removing Paper Jams
In the event of a paper jam, remove the paper as follows:
Deactivate the device by switching off the power.
Open the receipt roll cover.
Hold on tight to the device and pull out the jammed paper.
Replace the paper as described in the chapter “Changing the Receipt Roll”.
Switch the device back on to re-establish the power connection.
11.2
Battery Pack
11.2.1
Changing a Battery Pack
Battery packs may only be replaced with identical types or other types recommended by the
manufacturer.
Push a screw driver into the hole at the back of the payment terminal (1) and push the
latch (2).
