AEV Xtreme II Digital Audio Processor
AEV Broadcast Srl – via della Tecnica 33 – 40050 Argelato (BO) Italy
Web site www.aev.eu e-mail [email protected]
2
Guarantee
The equipment is warranted for a period of 2 years from the date of invoice (ex-works). The
warranty does not cover faults provoked by carelessness, natural causes and parts subject
to wear. In addition, the cost of shipment is not covered. The warranty will be voided if the
equipment is mishandled.
Technical Support
If you require technical support, contact AEV SERVICE giving a clear and concise account of
your speciic problem. Quote the serial number of your equipment by referring to the AEV
nameplate attached to the equipment itself as this is the most important piece of information
to be provided.
Telephone: 39+051 892963 Fax: 39+051 893605
Factory Service and Repairs
If problems arise while the equipment is being installed, consult this manual and check that
the installation is being carried out properly. If the problems still cannot be solved, call the AEV
SERVICE Department for further information. If the problem is a minor one we can a telephone
call will probably sufice. If, on the other hand, the equipment is to be shipped to AEV for
service or repairs.
Shipping Instruction
When shipping the equipment to AEV, use the original package in order to be certain that it will
be fully protected during handling. If you need the original package, call us for a new one.
If you ship the equipment in a different packing container, take care to provide a double
package by interposing padding material between the two containers in order to fully protect
the equipment during shipment. The package should be marked “FRAGILE” in red.
IMPORTANT:
Carefully read this paragraph as it contains important instructions concerning
operator safety and directions regarding the installation, operation and maintenance of the
equipment.
Failure to observe the safety instructions and information given in this manual
constitutes an
infringement of the safety rules and design specifications provided for this piece of
equipment
.
Futurcom Srl declines all responsibility
if any one of the safety rules given herein is not
observed.
Futurcom Srl declines all responsibility
if the end-user resells the product.
The equipment is to be used by people capable of operating it in a trouble-free manner and
it is
assumed that they are aware of the following safety rules.
• Keep this manual with the utmost care and close at hand so that it can be consulted whenever
needed
• After unpacking the equipment, check it for condition.
• Avoid banging the equipment.
• The packing material (plastic bags, polystyrene, nails, etc.) must never be left within the reach of
the children, as
these items are potential sources of danger
.
• Do not use the equipment in places where the temperature is not within the recommended
range, as speciied by the manufacturer.
• Before connecting the equipment, make sure the nameplate specifications correspond to the
mains electricity supply (the nameplate is located on the equipment enclosure).
• Do not remove the sticker from the equipment as it contains important specifications and the
relevant serial number.
• To join the equipment to the mains supply, use the power cord purchased with the equipment.
• The equipment must be used only for the purpose it was designed for.
• Abuse or misuse of the equipment is
extremely dangerous
for people, pets and property. The
manufacturer declines all responsibility for damage and injury resulting from
improper use
and
mishandling
.
• Certain basic safety rules must be observed when using electrical equipment, in particular: -
Never touch the equipment with wet and/or damp hands or other parts of the body.