AEV MMMS3000 - ON AIR CONSOLE
AEV Broadcast Srl
, via della Tecnica 33 – 40050 Argelato (BO) Italy
Web site www.aev.eu e-mail [email protected]
13
Control Studio Area
The Control Studio audio output level may be adjusted via the C.Studio potentiometer located
on the panel.
E
XT
1
When the EXT1 button is pressed, the following functions are set on: the EXT1 input signal is
sent to the Control Studio output, and the function previously set on the Control Studio bar is
disabled.
E
XT
2
When the EXT2 button is pressed, the following functions are set on: the EXT2 input signal is
sent to the Control Studio output, and the function previously set on the Control Studio bar is
disabled.
PGM
When the PGM button is pressed, the following functions are set on: the PGM input signal is
sent to the Control Studio output, and the function previously set on the Control Studio bar is
disabled.
When the UTL button is pressed, the following functions are set on: the UTL input signal is
sent to the Control Studio output, and the function previously set on the Control Studio bar is
disabled.
AUX
When the AUX button is pressed, the following functions are set on: the AUX input signal is
sent to the Control Studio output, and the function previously set on the Control Studio bar is
disabled.
CUE
When the CUE button is pressed, the following functions are set on: the signal on the CUE bus
is sent to the Control Studio output, and the function previously set on the Control Studio bus
is disabled.
TB
When the TB (talk back) button is pressed, the signal of the enabled microphone is sent to the
Control Studio output.
Notice
: the Microphone signal replaces the signal that, up to that moment, had been sent to the
pre-selected output. When the TB button is released, all switches back to the previous status.
Any PRIVATE conversation with a hybrid telephone can only be carried out by using the TB
microphone signal, with the channel “TELCO” on “STOP” and the CUE enabled.
Headsets Area
The Headsets audio output level may be adjusted via the “ Headset” potentiometer located on
the panel. As a standard, the signal routed on Control Room is sent to the Headset output. When
a CUE button of any channel is enabled, this CUE replaces the Control Room signal.
Using the Talk Back
There are two types of Talk back:
TB from Control Room (Producer) to Control Studio (DJ); TB from Control Studio (DJ) to Control
Room (Producer).
Talk Back from Control Room (Master control)
The TB from Control Room (Master control) can be sent to the Control Studio (DJ), TELEPHONE,
UTL and PGM.
When a TB from Control Room is received, the signal of the enabled microphone is sent to the
studio (Speaker) and it will replace the previously selected audio.
The same TB from Control Room enables the Mute on the Control Room output to prevent any
Larsen effects.
Talk Back from Control Studio (DJ)
The TB from Control Studio (DJ) is sent to the Control Room (Master control) and to the Telephone
Bus, when the telephone module is on STOP (private conversation with telephones)
