Starter Test:
This test
actually checks the cranking effectiveness of the battery and also the
1. With engine OFF, place
Automatic then apply the parking brake.
2. Connect the tester to the battery terminals and the display will light up
3. From the main MENU, select ‘Starter Test’ by scrolling down using
show:
4.
Press key to continue and the display will show
Note: In event that you did not crank the engine while on this screen, the starter test will
terminate after 30 seconds and
5.
Now switch the ignition key to ON and start cranking the engine until it starts.
6.
The results display will show as an example below:
Disclaimer
All information, illustrations, and specifications contained in this user manual are based on the latest
information available at the time of printing. The right is reserved
without obligation to notify any person or organizatio
Furthermore, the manufacturer or its sales agents are not liable for errors contained herein or for
incidental or consequential damages (including lost profits) in connection with the furnishing,
performance or use of this material.
actually checks the cranking effectiveness of the battery and also the starting condition
With engine OFF, place
the vehicle transmission in NEUTRAL for Manual and PARK for
Automatic then apply the parking brake.
Connect the tester to the battery terminals and the display will light up as shown
From the main MENU, select ‘Starter Test’ by scrolling down using
key to continue and the display will show:
In event that you did not crank the engine while on this screen, the starter test will
terminate after 30 seconds and return to the main menu.
witch the ignition key to ON and start cranking the engine until it starts.
The results display will show as an example below:
information, illustrations, and specifications contained in this user manual are based on the latest
information available at the time of printing. The right is reserved to make any changes at any time
without obligation to notify any person or organization of such revisions or changes.
Furthermore, the manufacturer or its sales agents are not liable for errors contained herein or for
incidental or consequential damages (including lost profits) in connection with the furnishing,
material.
Normal
Drop Voltage
6
starting condition.
transmission in NEUTRAL for Manual and PARK for
as shown.
key. The screen will
In event that you did not crank the engine while on this screen, the starter test will
witch the ignition key to ON and start cranking the engine until it starts.
information, illustrations, and specifications contained in this user manual are based on the latest
to make any changes at any time
n of such revisions or changes.
Furthermore, the manufacturer or its sales agents are not liable for errors contained herein or for
incidental or consequential damages (including lost profits) in connection with the furnishing,
State of Charge
before cranking
High voltage drop
Less than 9.6V
