BESA-12P User’s manual
-
27 -
www.aetool.com
AETOOL LTD.
Page 23
Press
key to continue and the display will show: (Fig.37)
Check the battery ratings and enter it as described in steps 10 to 12 (page
19~21) and the results will show as an example below: (Fig. 38 and Fig.39)
Fig.38 Results shown [OK-Recharge], it indicated that the battery has to be
fully charged first before repeating the test.
For Fig.39, the Results shown [To replace], this meant that the battery need to
be replaced as its internal plate resistance [
Int. R
] is higher than 15 mOhm.
15.
Pressing the
key at any moment will exit and return back to the
main menu screen (Fig.23).
Figure 37
Figure 38
Select Rating
CCA
SAE
DIN
JIS
IEC
EN
CA
Unknown
Battery: OK-Recharge
Measured: 220 CCA
Rating: 400 CCA
Volts: 11.96 V
Int. R: 12.24 mOhm
State of Charge is low!
Charge battery and test
again.
Battery: To replace
Measured: 120 CCA
Rating: 400 CCA
Volts: 10.56 V
Int. R: 20.24 mOhm
State of Charge is low!
Internal resistance is
high.
Figure 39
