3.3.2 Console interface
Connect your PC serial port to the Console interface with the cable supplied with StarVoice
to access local configuration, diagnostics and firmware upgrade. You can also connect the
backup unit serial cable to receive alarms and information on the PBU operation status.
POWER
CONSOLE
PWR
SYNC
LINK
LAN
RDY
(FA IL)
LOCAL
Stargate
StarVoice
3.3.3 Analogue telephone system
You can connect an analogue telephone system (phones, group 2/3 fax machines, analogue
modems, analogue PBX’s, etc.) to one of StarVoice analogue ports with an RJ-11 jack with
handset symbol or spring terminal block. The two connections are parallel connections: for
example, jack RJ-11 No. 1 is in parallel with spring terminal No. 1, etc.
The number of active ports depends on the contract subscribed with the service provider.
If you have a contract for two active lines, use port 1 and 2; for three active lines use
port 1, 2 and 3, etc.
No signal is heard when you pick up the handset of a phone connected to a non-active
port.
Figure 3-2: Analogue ports
Pag. 12
