3 Installation
Installation is simple and quick.
For easier installation please follow the sequence of operations illustrated in this Manual.
3.1 Package
Remove StarVoice and accessories from the package. Check that the contents complies
with the list of materials described in this Manual.
The following components are contained in the package:
No. 1 StarVoice (check the model compliance with the label);
⇒
⇒
⇒
⇒
⇒
⇒
⇒
⇒
No. 1 Quick User’s Manual;
No. 1 wall installation kit;
No. 1 power supply;
No. 1 network cable for connection to electrical mains;
No. 1 MiniDIN 8P – 9P (RS232) console cable;
No. 1 RJ-11 – RJ-11 cable for ADSL or SHDSL connection;
No. 1 CD with software and instructions.
3.2 Mounting
StarVoice can be placed on a horizontal surface or hung to the wall.
Make sure that the device is easily accessible and placed near an electrical outlet that
complies with current regulations.
The device must be placed in a dry place with good ventilation. Never place the device in
enclosed places without ventilation.
For wall installation (minimum height from the ground is 20 cm) drill two 6mm-diameter
holes on the wall as shown in Fig. 3-1.
Insert the dowels in the holes, tighten the screws and hook StarVoice on the slots.
Figure 3-1: Drilling template
Pag. 10
