Quick Start
Step 9
:
Start to train the dogs. Put the collar into the receiver and
wear the receiver around dog's neck. Remember to leave one finger
place between the collar and the neck, and then you can train the dogs.
-03-
Shock
Strong shock
Tip 3:
The duration for pressing the vibrate or shock button will
lead to difference on the length of the vibration or shock time.
The 1st dog
The 2nd dog
Both dogs
Tip 4:After 3 minutes of inactivity, transmitter will go into sleep
mode. You can wake it up by pressing any function keys(Vibrate or
Shock button )
.
6
7
8
Step 8:
produce weaker shocking effect, while the strong shock
button will produce stronger shocking effect.
Adjust shock intensity. Press the shock button will
Check the button functions (vibrate, shock and stronger
shock). Press the Vibrate button, the receiver will vibrate. Cap the
shock test kit on the metal prongs, and press the shock button. If
the bulb lights up, the shock function is normal.
Step 7:
Step 6:
Match the receiver and transmitter. Press the three
buttons under dog A mode, the first receiver will be paired along
with red light turns off and blue light starts flash; If you have
another receiver, turn it on and press the three buttons under
dog B mode, the second receiver will be paired; If you need to train
2 dogs simultaneously, press two buttons under dog AB mode,
both receivers will be controlled.
