Aeta Audio Systems 4MinX, User Manual

Page: 42 / 97

36 4MinX - User manual 55 000 061 - I
4.5.2. Menu : Time Code ( Option)
In this menu you can set the Time Code mode of operation:
- Off: all the records begin to 0h0m0s
-Free Run: Time code runs independently on its current value
-Ext TC: 4MinX following continuously an external code, including judgment
time
-Ext Tc / cont: 4MinX synchronizes to an external TC and continues to run the
TC even if the source is disconnected.
-
You also have the option to configure video format which is associated with:
23.976, 24, 25, 29.97, 30, 29.97 drop or 30 drop frames per second.
Set Time Code menu specify its value for the "free run" mode or when 4MinX
is used as a generator of time code. You can reset it to 0h:0m:0s, use the current
hour or set it as you want. An adaptation of LEMO5points to two sheets BNC
cable is available as an option.
Led bicolor on the right side of the 4minX gives you the State of the Time Code
module configuration
1 second 1 second
Time code not set
Time code set
Reader mode
Low Voltage (TC not set)
Low Voltage ( TC set)
“Recovery” mode
NOTE: The Time code is maintained during 3 hours with dedicated internal
batteries if you set it in EXT TC/CONT or Free Run
Note: The Time code charger works only when 4MinX is powered