Aesculap FAV5 CL, Instructions For Use Manual

Page: 9 / 118

7
Note
Switch off the battery-powered clipping machine
FAV5 CL before charging!
Note
Li-ion batteries heat up slightly during charging.
Note
Unplug the mains power cord at the mains socket when
the charger is not going to be used!
¾
To connect charger 4 : Plug in the device plug of
mains power cord 5 in charger 4 .
¾
Plug in the mains plug of mains power cord 5 at
the mains power socket.
¾
Place Li-ion battery 8 in charging bay 6 of the
charger 4 and charge.
- or -
¾
Place battery-powered clipping machine FAV5
CL
2 in charging bay 10 of the charger 4 and
charge.
Charge state indicator 7 or 9 lights up red.
After charging, the charge state indicator 7 / 9
shines green and the battery-powered clipping
machine FAV5 CL
2 /Li-ion battery 8 is ready for
operation.
4.2 Functional check of the battery-
powered clipping machine FAV5 CL
¾
Carry out a visual inspection.
¾
Check the switch position.
¾
Install the battery, see Chapter Changing the Li-ion
battery.
¾
Mount the blade correctly and lubricate it if neces-
sary, see Chapter Safe handling blade head.
¾
Keep a charged Li-ion battery on hand, as reserve.
¾
Clean battery-powered clipping machine FAV5 CL
prior to use, see Chapter Cleaning/disinfection.