7
OR
THEN
ADJUSTING THE WIRE STAND
The wire stand on the Air Scrubber Mobile by Aerus allows for quick release from the base, provides a stand or hanger for the unit
independent of the base, and allows the unit to either stand or hang from the base depending on how the base is mounted.
To adjust the wire stand, loosen the two knobs on the sides of the unit approximately 1/2 turn. The unit may then be tilted up or
down to adjust the angle or moved on the wire stand to change the height. You can also remove and change the position of the
wire stand to accommodate several different mounting methods. To reinstall, simply align the two clamp collars and insert the wire
stand. Once the unit is adjusted, tighten both knobs to hold it in place.
MOUNTING THE BASE
The base for the Air Scrubber Mobile by Aerus
®
can be mounted using the included suction cups, Velcro, or screws,
depending on preference. When using suction cups or Velcro, be sure the surface is smooth and clean. Dirt, grease,
protectants, and other substances will affect performance and holding ability.
• Peel and stick one part
of the Velcro to the base,
then attach the other to
a clean, dry surface, or...
• Attach suction cups by
pressing and twisting
into the base, or...
• Screws may be used for
extra security and where
the other methods are
not appropriate.
