Aertesi VESTA 80 FVI, Instruction, Operating And Maintenance Manual

Page: 16 / 28

I
The hydraulic connections of VESTA 80
FVI and vesta
80 HI
dehumidifiers are for the air pre and post-
treatment coils and the condensate drain hose.
The choice and installation of the system
components are at the discretion of the installer,
who must work in compliance with best technical
practices and statutory legislation.
The coils supply line must not be dependent on
the zone isolator valves.
HYDRAULIC CONNECTIONS
4
5
2
2
3
1
1 Floor or flat support
2
Beam with compression type antivibration
mount to be provided by the installer
3 Removable compressor access panel
4 Removable cover
5 Electrical panel
Mounted on beams
The figure alongside shows installation of the appliance
on a flat surface.
Choose antivibration mounts in compliance with
the weight of the appliance and ensure they are
installed correctly.
Opening of the unit cover (at the top in this case)
for fan maintenance can be performed from the
top with ease.
Choose antivibration mounts in compliance with
the weight of the appliance and ensure they are
installed correctly.
VESTA 80
HI
is equipped as standard with
four M6 threaded inserts on the base for fixing
antivibra -tion mounts to the unit.
750 25
173
312
25
25
750 25
173
302
25
25
Antivibra-
tion mount
FAN ACCESS
PANEL
M6
THREADED
INSERTS
Compression type antivibration mount
Male
inserts
14