Tel. +39 049 641 679
|
|
www.aercomponents.it
25
FLOOR MOUNTING
Wall brackets also can be used for floor mounting to lift the unit up.
1. Remove unit’s base feet. (4 pcs.)
2. Screw 2 wall brackets to the underside of the unit.
3. Install base feet on to the wall brackets.
NOTE
- Minimum distance between underside the unit and floor should be 110 mm. to assemble
discharge pipe easily.
600
500
min. 110 mm.
600
500
min. 110 mm.
7. INSTALLATION
WALL MOUNTING
1. Screw 2 wall brackets to the rear cover with appropriate fittings (4 pcs M5x10).
2. Fit 2 brackets to the wall (dimensions between mounting holes are indicated on the picture
below).
3. Be sure that condensation drain is connected properly.
600
500
min. 110 mm
EN
