AERPRO AERA10D
®
Radio Replacement Kit
for 2011-2018 Jeep Wrangler JK
AMHJP1K
Page 1
Introduction and Features
The AMHJP1K is a complete radio replacement kit for Jeep Wrangler JK. All modules and cables are included to retain important
features of the factory system, including: steering wheel-mounted radio controls, factory amplifier (if equipped) and AM/FM
reception. Plug & Play wiring harnesses allow for quick and easy installation without the need to cut or splice any wiring.
Important Notes
Recommended Tools
We recommend reading this manual thoroughly to familiarize yourself
with the entire process prior to beginning the installation.
1. Mounting Panel Front Frame
2. AERA10D Display Mounting Panel
3. Side Mounting Brackets
4. Top Support Bracket
5. Main Wiring Harness (RP4-JK07-HAR)
6. Radio Replacement Interface Module (RP4-CH11)
7. AM / FM Antenna Adapter (BAA22)
8. Dual USB Extension (SSUSB2)
Included Components
1
4
6
7
5
2
3
8
1. Does not retain the following factory features:
● uConnect
● In Premium Amplified Systems, only two input channels can be used from the aftermarket
radio,
therefore there will be no fading capability of the aftermarket stereo.
2. Directions for removing the display panel are on page 13.
Plastic Panel Tool
7mm Socket
Ratchet
Ratchet Extension
Phillips Screwdriver
Pick Tool
Flush Cutters
Wire Feeder
NOTE: Along with the AMHJP1K components,
additional hardware and wire harnesses from the
AERA10D (UN1810E) kit will also be used in the
installation. There is a component list, hardware
guide, wire harness descriptions and illustrations
in the UN1810E Installation Guide for reference.
