AeroWorks edge 540, Assembly Manual

Page: 14 / 36

14
HOW TO MOVE THE ELLIPTICAL
Due to the size and weight of the elliptical, moving
it requires two persons. Stand in front of the ellipti-
cal, hold the upright, and place one foot against one
of the wheels. Have a second person lift the handle
on the rear of the frame until the elliptical will roll on
the wheels. Carefully move the elliptical to the desired
location, and then lower it to the floor.
HOW TO LEVEL THE ELLIPTICAL
If the elliptical rocks slightly on your floor during use,
turn one or both of the leveling feet beneath the rear
stabilizer or beneath the frame until the rocking motion
is eliminated.
HOW TO USE THE TABLET HOLDER
IMPORTANT: The tablet holder was designed for
use with most full-size tablets. Do not place any
other electronic device or object into the tablet
holder.
To insert a tablet
into the tablet
holder, set the
bottom edge
of the tablet in
the tray. Make
sure that the
tablet is firmly
secured in the
tablet holder.
Reverse these
actions to remove the tablet from the tablet holder.
Upright
Lift
here
Place
your foot
here
Leveling Feet
Leveling
Foot