51
7. Using (3) 4-40 button head screws, secure the
hub cap to the hub as shown.
Note:
Depending on the brand of wheel used, it may
be necessary to cut the axle to allow clearance
for the hub cap.
8. Finished wheel installation shown below.
6. Slide the wheel followed by the remaining wheel
collar onto the axle. Tighten the wheel collar set
screw. Shortening the length of an L wrench
may allow easier access to tighten the wheel col-
lar set screw.
Note:
Use Blue Loctite on set screw, this will
prevent
it from
coming
loose
due to
vibration.
9. Repeat previous steps for the remaining wheel/
hub assembly.
