74
10. Use a felt tip marker to transfer the template cut-
out pattern to the cowl and mark cut location.
Note:
Pay close attention to the marker you
choose. Some permanent markers may not
be easily removed. Also, When using
rubbing alcohols or other paint removers,
always test on painted parts before using!
11. Remove the template and use a rotary cutting
tool and sanding drum to cut out the openings in
the cowl.
Note:
Take care not to remove too much material
or scratch the cowl. Install the cowling to
double check your cuts and make any
changes as necessary.
13. Slide the bottom half of the cowling over the
exhaust and onto the fuse as shown. Ensure that
the exhaust stingers do not come in contact with
the cowl at this time.
12. Remove the (16) 4-40x 10mm bolts from the
cowling as shown below.
14. Bolt the bottom half of the cowl to the fuse using
(4) 4-40-16mm bolts.
