48
6.
Remove the throttle pushrod and complete the
“Z” bend as shown. Make the bend approxi-
mately 1/2” wide to clear the muffler manifold
as shown.
7.
Reinstall the throttle pushrod and insert into
the pushrod exit hole as shown. Ensure the
throttle pushrod will line up with the engine
carburetor throttle arm with no binding.
8.
Install the throttle servo into the servo tray in
front of the wing tube as shown. Mark the
position of the servo mounting holes. Use a
1/16” drill to drill the servo mounting holes.
9.
Install the throttle servo into the servo mount
using servo mounting screws.
