78
11. Check the fit of the template at this time. It may
be necessary to make small adjustments to the
cutout to get it to fit properly.
12. Align template with bottom of cowl. Use a felt
tip marker to transfer the template cutout pattern
to the cowl and mark cut location.
Note:
Pay close attention to the marker you
choose. Some permanent markers may not
be easily removed. Also, When using
rubbing alcohols or other paint removers,
always test on painted parts before using!
9. Extend the cutout marks on the template from
the cylinder head to the rear air exit mark made
previously.
10. Use a hobby knife to cut out the engine cylinder
exit opening as shown.
13. Remove the template and use a rotary cutting
tool and sanding drum to cut out the opening in
the cowl.
Note:
Take care not to cut or scratch the
cowl.
