63
1. Gather the fuel tank parts as shown below.
◊
1 - 15oz fuel tank
◊
1 - Fuel tank stopper
◊
2 - Aluminum stopper mounts with screw
◊
1 - Fuel clunk- Medium
◊
3 - Aluminum tubing- Medium
◊
4 - Small nylon ties
◊
2’ - Large fuel tubing
(Supplied)
◊
1 - Aeroworks fuel “T”
(Not Supplied)
FUEL TANK ASSEMBLEY AND INSTALLATION FOR GLOW ENGINE
2. Assemble the stopper as shown below. Use Zip
ties to secure the pick up line to the tubing as
well as to the clunk.
Note:
Supplied rubber stopper can be used for glow
or gas fuels.
3. Finished stopper shown below.
Note:
Fill line will also be used to defuel tank,
lifting tail as high as possible will allow you to
completely drain the tank.
4. Install the supplied fuel line as shown below.
Fill Line
Carburetor
Muffler/Vent
Vent
Fill Line
Carburetor
