pag.
18 di 64
Use and Maintenance Manual
M
MCCHH88--1111//EEM
M -- M
MCCHH1133--1166//EETT
Standard
Cap.2 _ Basic information on the compressor
GENERAL INSTRUCTIONS
2.3
WARNING
- This manual must be read carefully before transporting, installing, using or carrying
out any maintenance on the compressor.
- It must be preserved carefully in a place known to compressor users, managers and
all transport/installation/maintenance/repair/final dismantling personnel.
- This manual indicates the purposes for which the compressor can be used and gives instructions
for its transport, installation, assembly, adjustment and use. It also provides information on
maintenance tasks, ordering spare parts, residual risks and staff training.
- It should be born in mind that the use and maintenance manual can never replace proper experience;
some maintenance jobs are particularly difficult and in this regard the manual only offers general
guidelines on the most important tasks, which must be carried out by personnel with proper
training (e.g. acquired during training courses run by the manufacturer).
- This manual is an integral part of the compressor and must be stored in a suitable container near
the compressor until its final demolition. If the manual is lost or damaged a copy can be requested
from the manufacturer.
- Make sure all users have understood the regulations for use and the meaning of the symbols on
the compressor.
- Observance of these technical instructions can prevent accidents: instructions have been drawn up
in compliance with EEC Machinery Directive 89/392 and subsequent amendments.
- In any case always observe national safety regulations.
- Do not remove or damage guards, labels or notices, especially those required by law.
- The adhesives attached to the compressor are there for safety purposes. They must be replaced if
they become illegible.
- This manual reflects the technical knowledge available at the time the compressor was sold and
cannot be considered inadequate simply because updated at a later time on the basis of new
experience.
- The manufacturer reserves the right to update products and manuals, without any obligation to
update preceding products or manuals except in exceptional circumstances.
- To request or receive any updates or additions to this use and maintenance manual (which shall
be considered an integral part of the manual) apply via the contact numbers given in section “1.6
Assistance”.
- Should you have any other queries or suggestions as to how to improve the manual please contact
the manufacturer.
- Should you sell the compressor AEROTECNICA COLTRI invites you to provide us with the details
of the new owner so that any new additions to the manual can be sent on.
