AEROTECNICA COLTRI MCH 13-16/ET Standard Use And Maintenance Manual Download Page 10

Page: 10 / 64

pag.

10 di 64

Use and Maintenance Manual

MCCHH88--1111//EEM

M -- M

MCCHH1133--1166//EETT

Standard

Cap.1 _ General

Do not destroy or modify the manual and update it with inserts published by producer only.

Machine type: High pressure compressor for breathing air and/or technical gases

Model:

MCH 13-16/ET Standard
MCH 8-11/EM Standard

Revision n°: 00

Manual version: 04/2007

Manufacturer’s data:

AEROTECNICA COLTRI Spa.

Via Colli Storici, 177
25010 SAN MARTINO DELLA BATTAGLIA (BRESCIA) - ITALY
Tel +39 030 9910301 - +39 030 9910297
Fax +39 030 9910283
http://www.coltrisub.it - http://www.coltrisub.com
e-mail: [email protected]

Appendices:
- Safety regulations

PRELIMINARY INFORMATION

1 – GENERAL

1.1

REQUIRED OPERATOR TRAINING

1.2

This manual must be read carefully:
- all compressor operators / maintenance personnel must read this entire manual with due care and attention

and observe the instructions/information contained herein.

- Company owners must ensure that the operator has the required training for operation of the compressor

and that he/she has read the manual.

Summary of Contents for MCH 13-16/ET Standard

































































Search results

Summary of Contents for MCH 13-16/ET Standard

Reviews:

Brands by name

Popular brands

AEROTECNICA COLTRI MCH 13-16/ET Standard, Use And Maintenance Manual

Search results

Summary of Contents for MCH 13-16/ET Standard

Reviews:

Brands by name

Popular brands