Electrical Specifications and Installation
MPS75SL/SLE Hardware Manual
3.1. Motor and Feedback Connectors
The MPS75SL/SLE comes from the factory completely wired and assembled. Each MPS75SL/SLE is
shipped with documentation regarding the wiring, controller interface connectors, and specifications.
N O T E :
Refer to the other documentation accompanying your Aerotech equipment. Call your Aerotech
representative if there are any questions on system configuration.
The System Integrator or qualified installer is responsible for determining and meeting all safety and
compliance requirements necessary for the integration of this stage into the final application.
D A N G E R : Remove power before connecting or disconnecting electrical components or
cables. Failure to do so may cause electric shock or damage to the equipment.
C A U T I O N : The stage controller must provide over-current and over-speed protection. Failure
to do so may result in permanent damage to the motor and stage components.
30
Chapter 3
www.aerotech.com
