Aerotech ECO225SL Series Hardware Manual Download | Manualshive

Page: 41 / 62

background image

3.4. Limits, Marker, and Machine Direction

Aerotech stages are configured to have positive and negative "machine" directions. The machine
direction defines the phasing of the feedback and motor signals and is dictated by the stage wiring (refer
to

). Programming direction of a stage is set by the controller that is used to move the stage.

Programming direction is typically selectable in the controller, while machine direction is hardwired in the
stage.

shows the machine direction of ECO225SL stages.

Figure 3-3:

Machine Direction

ECO225SL Hardware Manual

3.4. Limits, Marker, and Machine Direction

www.aerotech.com

41

«
...
39
40
41
42
43
...
»

Summary of Contents for ECO225SL Series































































Reviews:

No comments

Related manuals for ECO225SL Series

Brand: Salvis Pages: 40

Brand: IDEAL Pages: 2

Brand: Landoll Pages: 34

Brand: Tacx Pages: 2

Brand: C.E. Nierhoff & Co Pages: 7

Brand: NEC Pages: 29

Brand: TC Electronic Pages: 2

Brand: Bahco Pages: 131

Brand: Bahco Pages: 126

Brand: Cannon Pages: 40

Brand: NARGESA Pages: 34

Brand: Rane Pages: 38

Brand: Kartsana Pages: 36

Brand: Rapala Pages: 14

Brand: S.R.Smith Pages: 43

Brand: olympia electronics Pages: 4

Brand: Tactile Medical Pages: 23

Brand: Taarup Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands